Digital Ovulation Test

The Clearblue Digital Ovulation Test helps you maximize your chances of conceiving naturally by identifying the 2 most fertile days of each cycle.

It measures changes in the level of the main fertility hormone – luteinizing hormone (LH).

It is more accurate than calendar and temperature methods and gives you clear results on a digital screen.

Recommended Use

1. Prepare the ovulation test:

• Remove the ovulation test stick from the protective packaging. Remove the cap. Before applying urine to the ovulation test stick, it must be inserted into the test holder.
• Align the pink arrow on the test stick with the pink arrow on the test holder and insert it until it clicks into place.
• Wait until the "test ready" symbol appears and perform the ovulation test immediately.

2. How to do the test: - Hold the absorbent tip pointing downward in the urine stream for 5 to 7 seconds.

• Or collect a urine sample in a clean, dry container. Dip the absorbent tip into the urine for 15 seconds.
• Be careful not to wet the test holder.

3. Wait 3 minutes: - Keep the absorbent tip pointing downward or place the test horizontally. During the test, never hold it with the absorbent tip pointing upward.

After 20 to 40 seconds, the "test ready" symbol will flash to show that the ovulation test is working.

• Do not eject the ovulation test stick before obtaining the result.
• Replace the cap on the ovulation test stick and wait 5 minutes.

4. Read the results: In 3 minutes, the result will be displayed on the screen.

No LH surge: If the result is an "empty circle," it means the test did not detect an LH surge. Test again tomorrow at the same time using a new ovulation test stick.

LH surge: A "smiley face" means an LH surge was detected. Your 2 most fertile days are today and tomorrow, so having intercourse in the next 48 hours will maximize your chances of conceiving.

After reading the final result, eject the ovulation test stick and dispose of it.

Your result can only be read on the test holder display – you cannot determine the result based on the lines on the ovulation test stick. The result remains on the display for 8 minutes.

Do not reinsert a used ovulation test stick.